1, find the real wood flooring problems, such as local cracking,[url=http://formaria.org/waterproof-floor/1943.html]plans for garden enclosure[/url] serious scratches, a small range from the arch, etc., clearly the impurities on the board to keep clean.

2, began to use a large floor renovation machinery polished floor, prepared four different sandpaper, first with coarse sand grinding, remove the paint layer,[url=http://formaria.org/waterproof-floor/612.html]wood composite stair tread covers[/url] surface, wood layer of about 0.5 mm, and then fine sand polished floor to the surface smooth and smooth, to a new state. Around the corner of the local application of a special corner angle grinder grinding, if necessary, have to manually operate.

3, the original side seam transparent putty clear clean, painted in the new putty layer. Cracked place coated with glue or filled with wood blocks closed,[url=http://formaria.org/wpc-decoration-deck/1993.html]complete composite fence panel[/url] from the arch where the nail to stay, to avoid future problems.

4, painted. First brush primer, to be dry after the first dry brush after the first finish, dry paint after dry sandpaper carefully grinding, the surface grinding to slightly rough,[url=http://formaria.org/crack-resistant-deck/192.html]composite wood with plastic[/url] remove the powder layer according to the above procedures brush 2-3 times finish paint, and finally One can not grind.