1. If the color is too consistent, there is almost no color, it depends on the surface of the floor. If the color is too consistent, there is little color, [url=http://MenziesMini.co.uk/waterproof-deck/1132.html]3mm soft pvc sheet[/url] it depends on the surface of the floor Whether the pattern is the same. In general, solid wood flooring and laminate flooring surface of the pattern should be different for each piece, and strengthen the composite floor, each piece of the pattern is the same as alive.

2. Step on the floor to see whether there is sound: the acceptance, walking back and forth on the floor, the footsteps to focus on the wall and the door parts to pay more attention to acceptance, [url=http://MenziesMini.co.uk/waterproof-deck/3108.html]out deck floor distributor uae[/url] if found a sound of the site, to repeat the sound to determine the specific Position, and then mark with chalk. Encountered such a situation, you can ask to remove the resurfacing.

3. amount and touch! See the floor is deformed, warped: this need to use the tool. Acceptance method is to use 2 meters long ruler, against the floor, [url=http://MenziesMini.co.uk/wall-panel/3974.html]composite panel exterior wall cladding[/url] flatness should not be greater than 3 mm. Remember to measure a few more. If the pass rate of 80% or more as qualified.