Quality of metal parts and plastic parts Panel furniture uses metal parts and plastic parts as fasteners, so the quality of metal parts also determines the quality of panel furniture. Metal parts require [url=http://floorcarelv.com/decking/5101-balcony-patio-floor-covering.html]balcony patio floor covering[/url] dexterity, smoothness, and the surface is plated with good electrical conductivity, without rust, burrs, etc., and the precision of the mating parts is higher. The plastic parts should be beautiful in appearance and colorful in color. The strength of the parts in use must be strong and elastic, and should not be too thin.
The open type connector requires a flexible rotation and the inner spring is fitted tightly [url=http://floorcarelv.com/decking/5100-composite-decking-fitting-instructions.html]composite decking fitting instructions[/url] and properly. The main size of panel furniture is currently dominated by bedroom furniture and office furniture. There are also multi-functional film and television electrical cabinets and other products.
The national standard of furniture's main dimensions (ie function size) has requirements. For example, the depth of the wardrobe in the hanging wardrobe is equal to or greater than 530mm, the distance [url=http://floorcarelv.com/decking/5099-home-legend-flooring-latvia-news.html]home legend flooring latvia news[/url] between the upper side of the hanging clothesline to the upper surface of the bottom board is 1400mm or more, and the specified height of the table furniture is 680 to 760mm, including the middle drawer of the writing desk. The clearance height along the height to the ground should be greater than or equal to 520mm. The above main dimensions should be paid attention to when purchasing, because if the furniture is smaller than [url=http://floorcarelv.com/decking/5098-laminate-wood-thresholds.html]laminate wood thresholds[/url] the specified size, it will bring a lot of inconvenience. If the wardrobe space is too small, hanging the clothes will cause the door to close.
